iUni K18 Professional Hidden Camera and Microphone Detector

DESIGNED TO PROTECT YOUR PRIVACY

The iUni K18 professional detector is an excellent solution for perfect protection of your privacy. This device offers wireless radio frequency detection, laser scanning and magnetic field signal detection. It can accurately detect wireless radio frequency signals in the 1 MHz–8 GHz range from various electronic devices, such as hidden cameras, audio microphones, GPS car trackers, Wi-Fi routers and other spy equipment.
The flexible magnetic probe can help you detect a GPS tracking device hidden in or under your car or lorry.
This is an easy-to-carry anti-spy tool that you can take with you to a hotel or Airbnb. You can easily scan the bathroom, bedroom or meeting room to prevent the leakage of valuable information.

Detecting a wireless radio frequency signal:

- Rotate the antenna;
- Ensure the red LED is lit in the MS position; (if it is not lit, press and hold the M button for a long time);
- Switch on the device and adjust the potentiometer so that the LEDs light up to position 3 on the scale (ideally between 2 and 4) to achieve high sensitivity;
- Move the device to the area of interest, and if the electromagnetic field changes, the LEDs will start to light up and the device will change its noise;
- At this point, when more LEDs light up, you can reduce the sensitivity of the potentiometer, again until 2–4 LEDs are lit, thereby narrowing the search area until the device starts to light up with green LEDs again and changes the emitted noise;
- In this way, you can pinpoint the source of the electromagnetic field;
- To familiarise yourself with the device, you can practise on a Wi-Fi router or on a mobile phone whilst it is in use;
- We recommend that you do not search with a mobile phone in your pocket or in the vicinity of a mobile phone.

Detecting a magnetic field:

- Place the magnetic probe;
- Move to GS mode by holding down the M button for a long time;
- At this point, you can search for any magnetic source (GPS tracking device) in various locations in the car or in the house;
- If a magnetic field is detected, it will start emitting audible signals and the LEDs will begin to light up sequentially.

Laser scanning:

- When the "GS" button is held down, the LEDs can be made brighter, which helps to distinguish between possible reflections and light sources.
- You can find the best flashing frequency and focus on the target area;
- Move your eyes over the window area of the device to locate the camera lens, which will appear as a "dot" when the red LED lights up.

- 1 x iUni K18 professional spy camera and detector with microphone

-1 x Magnetic field probe

-1 x antenna

-1 x charger

-1 x User manual